You will need a serial cable to connect to the Pogoplug and then you can edit /etc/init.d/rcS to enable ssh connections. Foto sessner indersdorf, Bioconductor installation linux, Inox festival 2012.
You can get a cable on Amazon for under $5. Mario kart 7 music park final lap, New electric lifes what you make it.
Install debian wheezy dockstar how to#
There are plenty of current guides on how to connect to the pogoplug with the cable to enable ssh, here is what I used: The fine asshats at have locked you out with a firmware upgrade and they will provide you no assistance and actually lie on how to do it.
Install debian wheezy dockstar install#
"These instructions allow you to run Jeff's old installation script successfully, but it will install a very old version of u-boot and Debian and you will have to upgrade several times as you proceed.įirst off there is no way to connect to the stock Pogoplug from a web interface if you have the latest firmware installed. Installing Debian GNU/Linux in the DockStar NAND flash Back Debian GNU/Linux on (not next to) a DockStar by Christian FrankeOtherwise, you have been warned, proceed at your peril This tutorial explains how to install and configure the Apache web server on Debian 7 (Wheezy). If after you read those instructions a couple of times and still feel really uncomfortable trying them then wait a day and then reread them as it really is quite easy and your more than likely just need a break. The Apache HTTP Web Sever (Apache) is an open source web application for deploying web servers. If you plan to jump straight to the current u-boot and kernel from those forum post you may want to open a text editor and type step by step each command you intend to use to upgrade your system and then you can post them to see if any problems stick out before you begin. The above forum links will bring you to the current versions available from Bodhi, who updates them quite regularly.
You would save a lot of time and bandwidth by using Bodhi's procures for upgrading the rootfs/kernel and u-boot by following the instructions. This is a long and tedious way of upgrading to a current system. Links: FreeBSD installation on the DockStar, FreeBSD wiki: Marvell, Update uBoot on your Dockstar, Install Debian Lenny on a Seagate Dockstar, Using Linux. However, there are a lot of good information in this procedure and this thread, so I'd like to keep as a reference. So it will save a lot of time if you go straight to new u-boot and new rootfs installation threads, instead of follow this procedure. As feas has warned below, the procedure in this post installs an old u-boot and old kernel on your Pogo E02, using Jeff's old script.
0 kommentar(er)
